What's new

Japanese radiation meter instructions

C

Christianfellow

Guest
Hi!
I have bought a Japanese radiation meter (Hakarucchi Dosimeter Radiation Meter Geiger Detector) to be on the safe side. The problem is that I don't understand the instructions.

infoscan.jpg


Could somebody try to translate this instruction above to English?
 
Display types

12.34 - Current radiation amount in uSv/h.
12.3 - Cumulative radiation amount in mSv. The lit part of the LED on the left turns clockwise.
.Lo Current radiation amount is below 0.10 uSv/h.
.Hi Current radiation amount has exceeded 19.99 uSv/h.
Clr Cumulative radiation amount was reset to 0.
ba.Lo The battery is low, please replace it. If this message is shown, no accumulation is performed.
 
Display types

12.34 - Current radiation amount in uSv/h.
12.3 - Cumulative radiation amount in mSv. The lit part of the LED on the left turns clockwise.
.Lo Current radiation amount is below 0.10 uSv/h.
.Hi Current radiation amount has exceeded 19.99 uSv/h.
Clr Cumulative radiation amount was reset to 0.
ba.Lo The battery is low, please replace it. If this message is shown, no accumulation is performed.
Thank you for the translation Lanthas.
 
Everything I see says he's in Sweden , not Japan. Maybe the meter readings were from when it(the meter) was in Japan .
 
Back
Top Bottom